Thank you for your email, please find some instructions below on how to hang your pencil pleat curtains.
Before you start, you need to lie your curtains down flat, with the back of the curtain accessible. On the header tape, there are three cords that run through and end at each side. At one side, you need to tie the cords. If you dont do this, when you begin to gather the curtain - the heading tape will unravel and can cause problems with hanging your curtains.
* Top tip - Its most common to tie the ends of the cord, at the leading edge of the curtain. *
Once you have tied the cords, hold the three cords at the other end which are not tied, and pull them evenly to form the pleats.
Once you're happy with the pleats of the curtain tie the cords - do not cut the excess cord. Some people attach the cords to the lining with a safety pin to really keep them hidden but please be careful as to not damage the fabric.
The heading tape has three rows of pockets. For curtain tracks you will need to insert the hooks into the low or middle row of pockets so that the heading hides the track. For poles insert the hooks into the top row of pockets so that the curtain hangs below the pole. Just make sure you insert the hooks into the pockets rather than onto the cords!
And now you can attach your curtain to the pole